Käepidemed - tabel

For locks with an inter-axis distance of 72 mm.

Rever, Univer and Proget doors may be equipped on request with handles with special functions other than those provided by standard handles.

Versioon   Kirjeldus Funktsioneerimine Kasutamine
 M1, M1R, M1C  M1X   

handle/handle combination with cylinder hole on both sides. For combination with lock with an inter-axis distance of 72 mm (015)

 door opening by handle or key from both sides  applications in which both door opening directions are accessible without key

 

  

 
 M2, M2C  M2X handle/doorknob combination with cylinder hole on both sides. For combination with lock with an inter-axis distance of 72 mm (015) the doorknob side requires the key for opening applications in which only one of the door opening directions is accessible with a key
  
 M4  M4X doorknob/doorknob combination with cylinder hole on both sides. For combination with lock with an inter-axis distance of 72 mm (015) both sides require the key for opening. The doorknobs serve for pushing or pulling the door applications in which both door opening directions are accessible by key only
  
 M5 M5X plate/plate combination with cylinder hole on both sides. For combination with lock with an inter-axis distance of 72 mm (015) both sides require the key for opening applications in technical rooms with doors that usually remain closed and require key for opening
  
 M9 M9X doorknob/plate combination with cylinder hole on both sides. For combination with lock with an inter-axis distance of 72 mm (015) both sides require the key for opening. The doorknob serves for pulling the door applications in which both door opening directions are accessible by key only
M11 M11X handle/handle combination without cylinder hole. For combination with lock with an inter-axis distance of 72 mm (015) opening is possible at any time using the handle applications in which the door never needs to be locked
M20 M20X handle/handle and thumbturn latch combination for interior closure. For combination with lock with star-shaped spindles only (Stel 15) closure using thumbturn latch from inside. Emergency opening from outside with screwdriver typical closure for bathroom doors


NOTE
For stainless steel handle the Euro profile cylinder must be ordered separately (except for M11X and M20X handles). Only M1, M1C, M1X, M11 and M11X models are combinable with the three point locking mechanism.